January 14

- replacing the brake pressure switch -

As a result of my plan to fit a boot box behind the seats, I've had to slightly re-route the rear brake hardlines. Whilst I did this, I removed the adaptor that used to hold the brake pressure switch, and re-bled the brakes. It's probably my imagination, but they seem firmer now. Here's a picture of my ingenious idea to keep pressure on the brakes overnight to test for leaks:

January 28

- making the boot -

Quite a long time since I wrote anything, but I have been busy. Ish. Today saw me complete the boot, in the area behind the seats and in front of the fuel tank.

It was quite a hassle to make, and its a bit rough round the edges, but I needed something to fill the hole - for SVA I had a panel going all the way across the back immediately behind the seats, but since moving the seat belt mounts this didn't work so well.

- final postion -

The seats are now in their final position - as far back and as low as I can get them. Only time will tell if it's enough...

This page last updated on: Thursday, Aug 24 2006